Minimize Complexity,
Maximize Versatility

CONCEPT
GMK KNEE REVISION SYSTEM
THERE ARE NO IMPOSSIBLE CHALLENGES

The entire GMK Total Knee System has been designed to preserve joint functionality without dramatically altering anatomy and kinematics, even in cases of severe ligament instability or massive bone defects.

The stress-free modular mechanism of the GMK Hinge implant, along with the bone preserving design and comprehensive range of options, help the surgeon to address demanding joint salvage procedures as well as unstable primary surgeries where the clinical indications show evidence for a constrained implant.
Intuitive instrumentation will assist the surgeon to reduce the number of intraoperative steps, potentially making the entire surgery more efficient.

 

  1. Jump distance increases with the inlay thickness
  2. Modular hinge mechanism
  3. 6 Anatomic femoral sizes
  4. 360° Femoral offset
  5. Bone preserving femoral and tibial design
  6. 6 Anatomic tibial sizes
  7. 360° Tibial offset
  8. Cementless and cemented extension stems
PRODUCT RANGE

The GMK Hinge portfolio includes a comprehensive range of options to address multiple surgical scenario.

HINGE FEMORAL COMPONENT

6 sizes
Anatomical: left and right
Material: Cobalt-Chrome (Co-Cr-Mo ISO 5832-4)
Cemented

Material: Cobalt-Chrome (Co-Cr-Mo ISO 5832-4) + SensiTiN coating

HINGE TIBIAL COMPONENT

6 sizes
Anatomical: left and right
Material: Cobalt-Chrome (Co-Cr-Mo ISO 5832-4)
Cemented

Material: Cobalt-Chrome (Co-Cr-Mo ISO 5832-4) + SensiTiN coating

HINGE FIXED INLAY

Symmetric
Anteriorly flared to accommodate patellar tendon
6 sizes
Six levels of thickness (12 ,14, 17, 20, 23, 26 mm)
Additional fixation screw and hinge pivot included
Machined Ultra High Molecular Weight Polyethylene (UHMWPE ISO 5834-2)

OFFSET ADAPTER

Interchangeable femur / tibia
2 offset: 3 , 5 mm
Titanium alloy (Ti6Al4V, ISO 5832-3)

FLUTED CEMENTLESS EXTENSION STEM

Interchangeable femur / tibia
Diameter = 10,11,12,13,14,15,16,18,20,22 mm
Length = 65, 105, 150 mm
Titanium alloy (Ti6Al4V, ISO 5832-3)

CEMENTED EXTENSION STEM

Interchangeable femur / tibia
Tapered shape
Diameter = 11, 13, 16 mm
Length = 65, 105 mm
Titanium alloy (Ti6Al4V, ISO 5832-3)

DISTAL FEMORAL AUGMENTATION

Mechanically attached to femoral component (screw included)
Interchangeable medial / lateral side
Five levels of thickness: 4, 8, 12, 16, 20 mm
High nitrogen Stainless steel (M30NW, ISO 5832-9) and Titanium alloy screw (Ti6Al4V, ISO 5832-3)

POSTERIOR FEMORAL AUGMENTATION

Mechanically attached to femoral component (screw included)
Interchangeable medial / lateral side
Two levels of thickness: 5, 10 mm
High nitrogen Stainless steel (M30NW, ISO 5832-9) and Titanium alloy screw (Ti6Al4V, ISO 5832-3)

TIBIAL AUGMENTATION

Mechanically attached to femoral component (screws included)
Interchangeable medial / lateral side
Four levels of thickness: 5, 10 mm
High nitrogen Stainless steel (M30NW, ISO 5832-9) and Titanium alloy screw (Ti6Al4V, ISO 5832-3)

RESURFACING PATELLA

Anatomical shape
4 sizes
Machined Ultra High Molecular Weight Polyethylene (UHMWPE ISO 5834-2)
Cemented
Three fixation pegs

INSET PATELLA

Round shape
3 sizes
Machined Ultra High Molecular Weight Polyethylene (UHMWPE ISO 5834-2)
Cemented
One central fixation peg

TECHNICAL DATA

The femoral component is supplied pre-assembled, allowing to potentially save time in the operating room.
Moreover, the hinge mechanism is engaged intra-operatively thanks to a provided standardized torque wrench which doesn’t require luxation of the knee joint, thus is potentially less invasive to soft-tissues.

BONE PRESERVING FEMORAL DESIGN

The femoral box dimensions are reduced to a minimum and decrease with the femoral size, saving precious bone stock.
The hinge mechanism does not extend on the posterior condyles thus avoiding substantial bone loss as is not the case with most other implants currently available.

Moreover, the hinge mechanism does not extend on the posterior condyles, thus avoiding additional bone removal.

BONE PRESERVING AUGMENTABLE TIBIA

The internal surface of the tibial baseplate is mirror polished, potentially minimizing the risk of backside wear. The keel dimensions are the same as the GMK PRIMARY, allowing for the use of a modular offset option.
Mechanically attached augments are available to fill femoral and tibial bone defects and  manage the position of the joint line.

The jump distance, which is a key indicator of anti-luxation safety, increases with the inlay thickness  from 28 mm to 42 mm.

GMK HINGE fixed inlay provides excellent wear resistance, showing significantly lower wear values compared to the acceptable limit found in the literature [6].

 

POLYETHYLENE

Published papers show that polyethylene that does not undergo any irradiation or thermal treatments, that may affect mechanical properties, may show reduced potential of delamination[1]. Medacta provides machined, non-irradiated polyethylene for all GMK tibial inserts.

Read more

 

Interchangeable modular offset adapters are available for the femur and tibia in order to provide flexibility with a reduced inventory, avoiding the need for additional offset stems.
All modular connections are accurately tested[6] and dedicated instruments are available in the operating room to provide a reproducible fixation.

Due to different clinical indications, both cementless and cemented options are available. Cementless stems have longitudinal splines to provide rotational stability, whereas cemented stems have longitudinal pockets for cement and tapered shape to facilitate insertion.

INSTRUMENTATION

MODULAR TRAYS TO REDUCE HOSPITAL STOCK

The primary goal of a GMK Hinge knee replacement includes the restoration of anatomical alignment and functional stability, the accurate re-establishment of the joint line and the fixation and stabilization of the revision prosthetic implant components.

The GMK Hinge has flexible instrumentation which allows the staff to manage revision cases as well as difficult primary cases, adapting to every surgical scenario.

NO COMPROMISES ON SAFETY

Dedicated instruments are provided to reproduce the validated offset on femur and tibia.
All modular connections are then secured by a Morse taper, an additional screw, dynamometric wrenches and special impactors which provides a standardized and reproducible procedure. The modular hinge mechanism is engaged intra-operatively thanks to the torque wrenches provided in the instrument set.

INTRA-OPERATIVE FLEXIBILITY THANKS TO THE CROSSOVER TECHNIQUE

The instruments provided allow the surgeon to switch, intra-operatively, from a less constrained to a more constrained inlay when more stability is required.

PUBLICATIONS

[1] Ries M D, “Highly Cross-Linked Polyethylene. The Debate is Over-In Opposition”, The Journal of Arthroplasty, 20:59-62, 2005.
[2] Kondo et al. “Arthroscopy for evaluation of polyethylene wear after total knee arthroplasty”, J Orthop Sci, 13:433-437, 2008. Orthop Sci, 13:433-437, 2008
[3] Baker et al., “The effects of degree of Crosslinking on the fatigue crack initiation and propagation resistane of orthopedic-grade polyethylene”, J Biomed Mater Res A, 66(1):146-54, 2002.
[4] Muratoglu et al., “Unified wear model for highly crosslinked ultra-high molecular weight polyethylenes (UHMWPE)”, Biomaterials, 20:1463-70, 1999.
[5] Polyethylene in TKA: Do we really need cross-linked polyethylene?, MORE Journal Vol. 1 May 2011
[6] Data on file: Medacta

SYNERGY

FULL TRANSITION THROUGH THE SYSTEM

Same internal femoral profiles of GMK HINGE, GMK REVISION and GMK PRIMARY provides a full transition through the system, with the freedom to choose intra-operatively the most suitable constraint for each patient, even after the bone cuts have been performed.
In addition, modular add-on instruments trays make the procedure smooth and time-conserving, potentially allowing for increased OR efficiency.

EXPERIENCE THE SYNERGY BETWEEN THE GMK REVISION SYSTEM AND MYKNEE

Medacta offers you the opportunity to manage challenging cases, such as uni-compartimental knee revisions or difficult primary cases when augments or intramedullary canal fixation is required, with a system specifically designed for each individual patient: this is the synergy between GMK revision system and MyKnee®.
The accurate pre-operative MyKnee planning combined  with the straightforward crossover technique potentially allows one to manage challenging procedures with total confidence!

Resources
Related products